Engineering Question #1164
DeeCee, a 46 year old male from Indianapolis asks on January 8, 2003,
How does vacuum insulation work and can an R Value be assigned to it? Does the depth of the vacuum change the R Value? Does the cross sectional area affect the value? Finally, what is the typical vacuum depth for insulation, (torr, ect.)?
viewed 14926 times
answered on January 8, 2003
Typically, vacuum insulation thermal resistance is 25 to 30 R/inch. Typical urethane foam insulation material is about 7 R/inch for comparison. The R value of an evacuated space rises quickly as pressure drops and then flattens out after a relatively low vacuum is achieved. In other words, increasing the vacuum above a nominal amount doesn't make that much of a difference. The cross section of the evacuated area should not make too much difference either. Fundamentally, vacuum is a thermal break for conductive and convective heat transfer. It's important for the vacuum insulation to have a mirror surface to also minimize radiative heat transfer. The typical level for a vacuum is
Add to or comment on this answer using the form below.
Note: All submissions are moderated prior to posting.
If you found this answer useful, please consider making a small donation to science.ca.