Engineering Question #65
Gareth Cook, a 54 year old male from the Internet asks on September 16, 1999,
How do "security tags" in shops work? I'm referring to the white plastic, bar-coded tags containing two differently shaped (one is rectangular and one is a rhomboid) metal strips separated by a thin, clear plastic insulating material. One usually finds these on compact disc packages for example and unless the sales clerk in some way "deactivates" them an alarm is set off on exiting the shop through a peculiar gateway (which might be some sort of magnetic anomaly detector). Similarly functioning devices are to be found on clothing, but these are of a different design and are retained by the shop. What is the method of detection that is being used? Is radio frequency involved? How are they deactivated? Since this little bit of technology has evidently passed right by over my head I need some help in answering these questions!
viewed 15865 times
There are a number of different types of magnetic security tags. There is very little literature describing them, probably because the manufacturers don't want everyone to know how they work, since they then might be able to deactivate them themselves. However, one article on the subject, written by R. C. O'Handley of MIT, appeared in the April 1993 issue of Journal of Materials Engineering and Performance, page 211.
Usually there is a magnetic dipole antenna pair at the exit to the library or store, which exposes the tag (and the customer) to an alternating high-frequency electromagnetic field. It is of course important that the system produces a response only from the security tags and not from any other magnetic materials the customer might have, such as paper clips or hairpins. There are several different systems to produce a special magnetic response from the tags. Sometimes the sensor looks at specific harmonics (higher frequencies) of the magnetic response, which will be different for the tags. Others depend on resonant effects; the size and shape of the tag is designed to match the frequency of the antennas and create a much larger response than other magnetic materials. Many magnetic materials will respond very differently to electromagnetic fields when magnetized to saturation than when demagnetized, which might give you a clue as to the deactivation process. But if you learn too much more, you might be able to deactivate the tags yourself!
Rich Fletcher, MIT
answered on November 17, 1999
The free shiny metal strip is a magnetostrictive material made of amorphous metal ("metallic glass") which exhibits a relatively high amount of magnetostriction (10-6 or so). Basically this material expands and contracts in response to a magnetic field. Just like a tuning fork or any other strip of stiff material, this strip has a mechanical resonant frequency. When you tune the AC magnetic field to this frequency, you get a big response. This signal is then detected by the pickup coils, either as a resonance or as a ringing after a pulse of magnetic field is applied. The other piece of metal (rhomboid) is a permanent magnet. It turns out that the magnetostriction requires a small DC field to activate the coupling between magnetic and mechanical. So when this strip is demagnetized, the resonant strip no longer "sings" and the tag becomes dead.
Add to or comment on this answer using the form below.
Note: All submissions are moderated prior to posting.
If you found this answer useful, please consider making a small donation to science.ca.